BenQ SX751 User Manual page 28

Correcting Corner Fit
Manually adjust four corners of the image by setting the horizontal and vertical values.
• Using the OSD menu
1. Press MENU/EXIT and then press ◄/► until
Display
the
2. Press ▼ to highlight Corner Fit and press
MODE/ENTER. The Corner Fit page
displays.
3. Press ▲, ▼, ◄, ► to select one of the four
corners and press MODE/ENTER.
4. Press ▲/▼ to adjust vertical values from 0 to
60.
5. Press ◄/► to adjust horizontal values from 0
to 60.
28 Operation
menu is highlighted.