BenQ SX751 User Manual page 60

FUNCTION
Closed
Caption
12V Trigger
Standby
Settings
60 Operation
DESCRIPTION
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed
captioned (usually marked as "CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).
Enable or disable 12V trigger output. Used to trigger external device
such as an electric screen or light control, etc. Consult your dealer
for how to connect these devices.
Network
• Enable Network Standby Mode
Selecting On enables the function. The projector is able to
provide the network function in standby mode. Selecting Off
disables the function. The projector does not provide the
network function in standby mode.
• Switch to normal standby mode
Allows the projector to disable the network function after a set
period of time after it enters standby mode. For instance, if 20
min is selected, the projector is able to provide the network
function for 20 minutes after it enters standby mode. When 20
minutes is up, the projector enters normal standby mode.
This function is only available when Enable Network Standby
Mode is On.
Microphone
Selecting On enables the function, and the microphone can be used
even in standby mode.
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the PC jack is correctly
connected to devices. See
the connection.
Audio Pass Through
Press ◄/► to choose the source that you wish to use in operation
mode. See "Connection" on page 22
When the corresponding jacks are correctly connected to the
device, the projector can output an audio signal to the external
speaker when it is in standby mode. The built-in speaker(s) will be
muted in standby mode.
Enabling this function slightly increases the standby power
consumption.
"Connection" on page 22
for how to make the connection.
for how to make