Technical Information; Led Fault Indication - Bose PowerShare PS602P Installation And Operating Manual

Technical Information

LED Fault Indications
Figure 14. PS602 and PS602P
POWER
PowerShare
Adaptable Power Ampli er
POWER LED (all amplifiers)
Solid amber LED indicates an over-temperature fault
Solid red LED indicates a power supply fault
SIGNAL LED (PS602 and PS602P)
Both LEDs will display solid red if a power supply fault is detected
SIGNAL LED (PS604)
All four LEDs will display solid red if a power supply fault is detected
LIMIT LED (PS602 and PS602P)
Each LIMIT LED will individually display solid red if there is an EHF fault on that channel
Both LEDs will display solid red when the outputs are muted due to an amplifier fault, or if there is a power supply fault
LIMIT LED (PS604)
Each LIMIT LED will individually display solid red if there is an EHF fault on that channel
LIMIT LED 1 & 2 will display solid red when the outputs are muted due to an amplifier one fault
LIMIT LED 3 & 4 will display solid red when the outputs are muted due to an amplifier two fault
All four LEDs will display solid red if there is a power supply fault
30 English
Figure 15. PS604
SIGNAL
1 2
LIMIT
SIGNAL
POWER 1 2
LIMIT
PowerShare
Adaptable Power Amplifier
pro.Bose.com
3 4
PS602
Installation Guide