Bose PowerShare PS602P Installation And Operating Manual page 3

pro.Bose.com
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding prong. The wide blade or third prong is provided for your safety. If
the provided plug does not fit in your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way such as
power-supply cord or plug is damaged; liquid has been spilled or objects have fallen into the apparatus; the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
This product conforms to all applicable EU directive requirements. The complete Declaration of Conformity can be found at www.
Bose.com/compliance.
Product Ratings:
Input Voltage: 100-240 VAC
Frequency: 50/60 Hz
Current or Power: 700 W maximum
This Product meets the immunity requirements for the E2 class EN55103-2 directive.
Initial turn on inrush current:
PS602: 12.33 A (230 VAC 50 Hz), 8.27 A (120 VAC 60 Hz)
PS602P: 14.14. A (230 VAC 50 Hz), 8.04 A (120 VAC 60 Hz)
PS604: 11.79 A (230 VAC 50 Hz), 11.72 A (120 VAC 60 Hz)
Inrush current after 5 seconds AC mains interruption:
PS602: 8.22 A (230 VAC 50 Hz), 8.14 A (120 VAC 60 Hz)
PS602P: 8.27 A (230 VAC 50 Hz), 8.43 A (120 VAC 60 Hz)
PS604: 10.57 A (230 VAC 50 Hz), 10.75 A (120 VAC 60 Hz)
Information About Products That Generate Electrical Noise (FCC Compliance Notice for US)
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at one's own
expense.
This product complies with the Canadian ICES-003 Class A specifications.
CAN ICES-3(A)/NMB-3(A)
For China:
仅适用于海拔 2000m 以下地区安全使用
Only suitable for use at areas with altitude less than 2000 m.
Only suitable for use at non-tropic climate areas.
Important Safety Instructions
Important Safety Instructions
English 3