Checking The Printer Status - Windows; Checking The Printer Status - Mac Os; Removing Jammed Paper - Epson XP-452 Series User Manual

User's Guide
* In some print cycles a very small amount of surplus ink may be collected in the ink pad. To prevent ink leakage
from the pad, the printer is designed to stop printing when the pad has reached its limit. Whether and how often
this is required will vary according to the number of pages you print, the type of material that you print and the
number of cleaning cycles that the printer performs. The need for replacement of the pad does not mean that your
printer has ceased to operate in accordance with its specifications. The printer will advise you when the pad
requires replacing and this can only be performed by an authorised Epson Service provider. The Epson warranty
does not cover the cost of this replacement.
Related Information
"Contacting Epson Support" on page 168
&
"Menu Options for Printer Setup" on page 112
&
"Supported Memory Card Specifications" on page 162
&
"Installing Applications" on page 129
&
"Web Config" on page 116
&
"Updating Applications and Firmware" on page 129
&

Checking the Printer Status - Windows

1. Access the printer driver window.
2. Click EPSON Status Monitor 3 on the Maintenance tab.
Note:
❏ You can also check the printer status by double-clicking the printer icon on the taskbar. If the printer icon is not
added to the taskbar, click Monitoring Preferences on the Maintenance tab, and then select Register the shortcut
icon to the taskbar.
❏ If EPSON Status Monitor 3 is disabled, click Extended Settings on the Maintenance tab, and then select Enable
EPSON Status Monitor 3.
Related Information
"Windows Printer Driver" on page 118
&

Checking the Printer Status - Mac OS

1. Select System Preferences from the
then select the printer.
2. Click Options & Supplies > Utility > Open Printer Utility.
3. Click EPSON Status Monitor.
You can check the printer status, ink levels, and error status.

Removing Jammed Paper

Check the error displayed on the control panel and follow the instructions to remove the jammed paper including
any torn pieces. Next, clear the error.
Solving Problems
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
132