Troubleshooting - La Crosse Technology WT-2160U Instruction Manual

TROUBLESHOOTING

NOTE: For problems not solved, please
contact La Crosse Technology via e-mail or
phone, or visit our website,
www.lacrossetechnology.com
Problem: The time and date will not set
initially.
Solution: It usually takes overnight before
the clock can receive the signal due to the
interference the sun has on the WWVB
signal. Wait overnight for the signal.
Solution: Computer monitors and
televisions can cause interference with the
signal reception. Please keep the clock at
least six feet from electrical sources.
Solution: In some areas of the US, in
particular on the East and West coasts, the
signal is very weak. It may take up to 72
hours before a good signal is received. The
reception can be helped by placing the clock
in a window facing Colorado, with the back
towards Colorado.
Solution: Be sure the time zone is set to a
US time zone.
13