LCD screen message
Check that the printer driver is
installed on the computer and that
the port settings for the printer are
correct.
Check that the printer driver is
installed on the computer and that
the USB port settings for the printer
are correct.
Recovery mode
Parent topic:
Related references
Where to Get Help
Related tasks
Removing and Installing Ink Cartridges
Checking for Software Updates
Accessing the Web Config Utility
Related topics
Wi-Fi or Wired Networking
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Load plain paper in the paper cassette.
3. Press the
4. Select Maintenance.
Condition/solution
Make sure the printer port is correctly configured. In Windows,
make sure the port is set to a USBXXX setting for a USB
connection or EpsonNet Print Port for a network connection.
An error has occurred during firmware updating. Connect your
product using a USB cable and try downloading the Firmware
Update from the Epson support site. If you still need help,
contact Epson for support.
Solving Problems
home button, if necessary.
228