Table of Contents
Advertisement
Remote ID
When you use the system with multiple projectors,
you can operate all the projectors simultaneously or
each projector individually using single remote control,
if a unique ID number is assigned to each projector.
There are 7 different remote control IDs: [All],
[ID1]~[ID6].
1 )
Press ▲▼ to select [Remote ID].
2 )
Press ► to display the setting dialog
box.
3 )
Press ◄► to select the desired item.
Attention
When operating the projector under [All] code, you can
z
operate several projectors at the same time.
If you want to control the projector with a specified
z
remote control ID, make sure the remote control ID on
the remote control fit to the remote control ID on the
Æ
projector. (
page 20)
Startup Logo
Set this function to display the Panasonic logo when
the projector is turning on.
1 )
Press ▲▼ to select [Startup Logo].
2 )
Press ► to display the setting dialog
box.
3 )
Press ◄► to switch [On]/[Off].
The logo will display when the
On
projector is turning on.
The logo will not display when the
Off
projector is turning on.
UART Mode
Use this function to select RS-232 or LAN function.
1 )
Press ▲▼ to select [UART Mode].
2 )
Press ► to display the setting dialog
box.
3 )
Press ◄► to select the desired item.
Control the projector via <LAN>
LAN
terminal.
Control the projector via <SERIAL
RS-232
IN> terminal.
Note
When [RS-232] is selected, [LAN(Standby)] and the
z
items of [LAN] are disable.
LAN (Standby)
Use this function to use network function when the
projector is in standby mode.
1 )
Press ▲▼ to select [LAN (Standby)].
2 )
Press ► to display the setting dialog
box.
3 )
Press ◄► to switch [On]/[Off].
LAN function is available when in
On
standby mode.
LAN function is unavailable when
Off
in standby mode.
Reset
Return all data that has been set in the [Setting] menu
to the factory defaults.
1 )
Press ▲▼ to select [Reset].
2 )
Press ► to display the setting dialog
box.
3 )
Press ▲▼ to select [Yes].
4 )
Press ► to execute.
Note
Lamp used time has been set by user in the [Security]
z
menu will not be reset.
Setting
41
ENGLISH -
Advertisement
Table of Contents
