Table of Contents
Advertisement
Connect to Network
The projector has a network function, and the following operations are available from the computer using the web
browser control.
Setting and adjustment of the projector.
z
Display of the projector status.
z
Transmission of an E-mail message when there is a problem with the projector.
z
This projector supports "Crestron RoomView" and the following application software from Crestron company.
(
Æ
page 51)
RoomView Express
z
Attention
Connects LAN to indoor equipment.
z
Set the [UART Mode] in the [Setting] menu to [LAN] before controlling the projector via <LAN> terminal.
z
Note
A LAN cable is required to use the wired LAN function.
z
A Web browser is required to use this function. Confirm that the Web browser can be used beforehand.
z
Compatible OS : Windows XP/Windows Vista/Windows 7, Mac OS X v10.4/v10.5/v10.6/v10.7
Compatible Web Browser : Internet Explorer 7.0/8.0/9.0, Safari 4.0/5.0 (Mac OS)
Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be
z
used beforehand.
Use shielded LAN cable (STP cable) that is compatible with category 5 or above.
z
Use a LAN cable with length of 100 m or shorter.
z
Name and function of network function parts
J
(1) ACT lamp (yellow)
Blinks when the LAN network function acts
normal.
(2) LAN terminal (10BASE-T/100BASE-TX)
Used to connect the LAN cable here.
(3) LINK lamp (green)
Lights on when connected to network.
Computer
LAN cable (straight)
Hub
Projector
LAN cable (straight)
(1) (2) (3)
LAN
47
ENGLISH -
Advertisement
Table of Contents
