Table of Contents
Advertisement
2)
Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
3)
Press as to select [TIME ZONE].
4)
Press qw to switch [TIME ZONE].
Setting the date and time manually
1)
Press as to select [DATE AND TIME].
2)
Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
3)
Press as to select [ADJUST CLOCK].
4)
Press the <ENTER> button.
f The [ADJUST CLOCK] screen is displayed.
5)
Press as to select an item, and press qw to set the local date and time.
6)
Press as to select [APPLY], and press the <ENTER> button.
f The setting of the time will be completed.
Setting the date and time automatically
1)
Press as to select [DATE AND TIME].
2)
Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
3)
Press as to select [ADJUST CLOCK].
4)
Press the <ENTER> button.
f The [ADJUST CLOCK] screen is displayed.
5)
Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
f The items will switch each time you press the button.
[OFF]
[ON]
6)
Press as to select [APPLY], and press the <ENTER> button.
f The setting of the time will be completed.
Note
f To set the date and time automatically, the projector must be connected to the network.
f If synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is turned [ON], or if [NTP SYNCHRONIZATION] is turned
[ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].
f Access the projector via a web browser to set the NTP server. Refer to "[Adjust clock] page" (x page 108) for details.
[SAVE ALL USER DATA]
Save the various setting values as a backup in the built-in memory of the projector.
1)
Press as to select [SAVE ALL USER DATA].
2)
Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3)
Enter a security password and press the <ENTER> button.
4)
When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button.
f [PROGRESS] is displayed while saving data.
Note
f The image setting registered in [USER LOGO] is not saved.
90 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Disables [NTP SYNCHRONIZATION].
Enables [NTP SYNCHRONIZATION].
Advertisement
Table of Contents
