Table of Contents
Advertisement
9
[E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail addresses
are to be used.
Leave it blank when two E-mail addresses are not to be used.
[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1
[Auth]
Select the authentication method specified by your Internet
service provider.
2
[SMTP Auth]
Set when the SMTP authentication is selected.
3
[POP server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A to Z, a to z, 0 to 9)
Minus sign (-) and period (.)
4
[User name]
Enter the user name for the POP server or the SMTP server.
110 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
9
10
11
10 Settings of the conditions to send E-mail
Select the conditions to send E-mail to the second E-mail
address.
[MAIL CONTENTS]:
Select either [NORMAL] or [SIMPLE].
[ERROR]:
Send an E-mail when an error occurred in the self-diagnosis.
[INTAKE AIR TEMPERATURE]:
Send an E-mail when the air intake temperature has reached
the value set at the above field.
[PERIODIC REPORT]:
Place a check mark on this to send E-mail to the second E-mail
address periodically. It will be sent on the days and time with
the check mark.
11 [Submit]
Update the settings.
1
2
3
4
5
6
7
8
5
[Password]
Enter the password for the POP server or the SMTP server.
6
[SMTP server port]
Enter the port number of the SMTP server.
(Normally 25)
7
[POP server port]
Enter the port number of the POP server.
(Normally 110)
8
[Submit]
Update the settings.
Advertisement
Table of Contents
