Table of Contents
Advertisement
Setting [AUTO POWER SAVE]
Set whether to enable the three functions [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], and [AV MUTE DETECTION].
1)
Press as to select [ECO MANAGEMENT].
2)
Press the <ENTER> button.
f The [ECO MANAGEMENT] screen is displayed.
3)
Press as to select [AUTO POWER SAVE].
4)
Press qw to switch [AUTO POWER SAVE].
f The items will switch each time you press the button.
[ON]
[OFF]
5)
Press as to select [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], or [AV MUTE
DETECTION].
[AMBIENT LIGHT
DETECTION]
[SIGNAL DETECTION]
[AV MUTE DETECTION]
6)
Press qw to switch the setting of [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], or [AV MUTE
DETECTION].
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f When [AUTO POWER SAVE] is [OFF], [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], and [AV MUTE DETECTION] cannot be
set.
f [AMBIENT LIGHT DETECTION] cannot be selected when viewing 3D videos. This is fixed to [OFF].
Setting [NO SIGNAL SHUT-OFF]
A function that automatically switches the power source of the projector to standby if there is no input signal for a certain period of time. The
time before switching to standby can be set.
1)
Press as to select [ECO MANAGEMENT].
2)
Press the <ENTER> button.
f The [ECO MANAGEMENT] screen is displayed.
3)
Press as to select [NO SIGNAL SHUT-OFF].
4)
Press qw to switch [NO SIGNAL SHUT-OFF].
f The items will switch each time you press the button.
[DISABLE]
[10MIN.] - [90MIN.]
Setting [STANDBY MODE]
Set the power consumption during the standby.
1)
Press as to select [ECO MANAGEMENT].
2)
Press the <ENTER> button.
f The [ECO MANAGEMENT] screen is displayed.
3)
Press as to select [STANDBY MODE].
78 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Enables power-saving mode.
Disables power-saving mode.
Adjusts the light source power depending on the brightness of the location of the projector.
Reduces the power of the light source when there is no signal.
Reduces the power of the light source in AV mute mode.
Enables the setting.
Disables the setting.
Disables the No signal shut-off function.
Sets the time in 10-minute intervals.
Advertisement
Table of Contents
