Intended Use; Heat Gun Safety Warnings - Ryobi R18HG-0 Original Instructions Manual

Safety, performance, and dependability have been given
top priority in the design of your heat gun.

INTENDED USE

The heat gun is is intended to be used only by adults who
have read and understood the instructions and warnings in
this manual, and can be considered responsible for their
actions.
The heat gun can be used for the purposes listed below:
■ Shrink fitting
■ Bending plastic pipes
■ Thawing frozen pipes
■ Softening adhesives
■ Soft soldering
■ Window tinting
Do not use the product for any other purposes.

HEAT GUN SAFETY WARNINGS

■ Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions
also.
■ Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
■ Do not operate the
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Battery products create sparks
which may ignite the dust or fumes.
■ Keep children and bystanders away while operating
the product. Distractions can cause you to lose control.
■ The product is intended for household use only.
■ The heat gun may start a fire if appropriate precautions
are not taken.
■ The heat from the heat gun may reach combustible
materials which you may not be able to see.
■ Do not leave the heat gun unattended while it is
operating.
■ Keep the heat gun away from rain or water to avoid
risks of fire or electric shock.
■ Store under cover in a dry place.
■ The nozzle gets extremely hot. Wear gloves and eye
protection.
■ Do not direct the hot airflow towards people or animals.
■ Never use the heat gun near flammable materials or in
the presence of flammable gases.
■ Never reduce the hot airflow by blocking or covering
the nozzle.
■ Be careful not to touch the nozzle as it becomes
extremely hot.
■ Ensure that the nozzle does not come into contact with
materials during or after operation.
■ Always wear eye protection when stripping paint
overhead.
■ When using the heat gun, do not wear loose clothing
or jewellery. Wear non-slip footwear and a hair net to
protect and retain hair.
product in explosive
■ Make sure you are always well balanced when using
the heat gun.
■ Ensure that the heat gun is always clean, dry and free
from oil or grease.
■ Never force the tool or accessories, and only use them
for the purpose for which they are designed.
■ Always keep the heat gun upright or suspend it with the
stand supplied.
■ Never use the heat gun in a damp or very wet area (for
example: bathrooms, saunas).
■ Never leave the heat gun out in the rain and do not use
it on very damp days.
■ Never push anything down inside the hot air nozzle.
■ Always allow the heat gun to cool down completely
before storing it.
■ Always store the heat gun in a safe place, out of the
reach of children. It is not a toy.
■ A fire may result if the product is not used with care,
therefore:
– be careful when using the product in places where
there are combustible materials;
– do not apply to the same place for a long time;
– do not use in presence of an explosive atmosphere;
– be aware that heat may be conducted to combustible
materials that are out of sight;
– place the product upright and allow it to cool down
before storage;
– do not leave the product unattended when it is
switched on.
■ Check the area where the heat gun is to be used.
Behind ceilings, floors and false ceilings may contain
highly flammable material. Always check these before
using the heat gun.
■ When working on small or irregular shaped objects,
clamp the object in a vice or clip.
■ Ensure the tool switch is at off position before installing
the battery pack.
■ Remove the battery pack from the heat gun when it
is not in use. Ensure that the heat gun cannot start
accidentally. If the heat gun stops while it is in use,
disconnect it from the power supply and have it serviced
by an authorised service centre.
■ Always concentrate on the job and use common sense
when working with the product. Do not use the product
when you are tired or taking medication that may make
you drowsy.
■ Never use the heat gun in combination with solvents.
■ After use, remove any paint or varnish residue on the
nozzle and scrapers. This could catch fire.
■ Always work in a well ventilated area. Flakes and
residues of lead-based paints are highly toxic.
■ Do not expose battery products to rain or wet conditions.
Water entering a battery product will increase the risk
of electric shock.
■ Use the product only for its intended use as described
in this manual.
■ If the product is not working properly, has been
dropped, damaged, left outdoors or dropped into water,
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
English | 1