Maytag MVWB835DW4 Use & Care Manual page 11

8.
Select cycle
Steam model shown
Turn cycle knob to choose your wash cycle.
9.
Select Temperature
Light soils
Colors that
bleed or
fade
Once you select a cycle, select the wash temperature by
touching the Temperature button to the desired setting. Even
for cold wash settings, some warm water may be added to the
washer to maintain a minimum temperature.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your items. If not sure on which temperature
to use, refer to the chart above or select a cooler temperature.
Moderate Heavy
soils soils
Bright Whites
colors
Pastels
10.
Select SOIL LEVEL
Once you select a cycle, select the soil level by touching the
Soil Level button to the desired setting.
11.
Select cycle options, if desired
Steam model shown
If you would like to add an Extra Rinse and/or Oxi option, touch
the button for that feature.
12.
Touch and hold Start/Pause
button to begin wash cycle
Touch and hold the Start/Pause button for up to 3 seconds
to start the wash cycle. When the cycle has finished, the
end-of-cycle signal will sound (if set). Promptly remove items
when cycle is done to avoid odor, reduce wrinkling, and avoid
rusting of metal hooks, zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add 1 or 2 missed items:
Touch the Start/Pause button to pause the washer; the lid will
unlock once the washer movement has stopped. This may take
several minutes if the load was spinning at a high speed. Then
close the lid and touch and hold the Start/Pause button again
for up to 3 seconds to restart the cycle.
IMPORTANT: If the lid is left open for more than 10 minutes
the water will pump out and the F8E6 error code will appear
on the display.
11