Connecting A Pay-Tv Decoder / Bskyb / Vcr - LG RHT599H Manual

CONNECTING A PAY-TV / CANAL PLUS DECODER
DISPLAYING SET UP MENU
a) Press HOME [ ]. First menu is displayed.
b) Press [ ] until Easy Menu is displayed
c) Select SETUP
d) Press OK [ ] to display set up menu
To watch or record analogue PAY-TV/Canal Plus programmes:
a) Disconnect Unit's mains lead
b) Use a SCART lead to connect AV2 Decoder port on Unit to
corresponding port on Decoder
c) Reconnect Unit's mains lead
d) Display set up menu (see Displaying Set Up Menu)
e) Select AV2 Connection from middle panel
f) Select Decoder from right panel
g) Press OK [ ] to confi rm
h) Select Canal from middle panel
i) Select ON from right panel
j) Press OK [ ] to confi rm
Unit does not need to be switched on to view signal.
To decode encoded signal for recording or watching PAY-TV/Canal
Plus programs (see General Information section):
a) Display set up menu (see Displaying Set Up Menu)
b) Auto Programming is highlighted. Select Program Edit from
middle panel
c) Select Edit from right panel
d) Press OK [ ]. Channel editing screen is displayed.
e) Press [AV/INPUT] once. Decoder On/Off option is displayed in
left panel.
f) Press OK [ ] to select ON. Canal+ is displayed when ON is selected.
g) Pressing OK [ ] a second time turns option OFF.
h) Press BACK [ ] to exit
LG RHT49X instructions.indd Sec1:15 LG RHT49X instructions.indd Sec1:15
AV2 Connection
To connect a decoder or other device to AV2 Decoder port on rear
panel of Unit:
a) Display set up menu (see Displaying Set Up Menu)
b) Auto Programming is highlighted. Select AV2 Connection from
middle panel
c) Select option in right panel:
Decoder to connect a PAY-TV decoder to AV2 Decoder port
on Unit
Others to connect a VCR or similar recording device to AV2
Decoder port on Unit
d) Press OK [ ] to confi rm
Connecting a B Sky B Tuner / VCR / similar recording device
To connect a B SKY B Tuner / VCR or another similar recording
device follow these steps:
a) Disconnect Unit's mains lead
b) Use a SCART lead to connect AV2 Decoder port on Unit to VCR
SCART port on device
d) Reconnect Unit's mains lead
e) Display set up menu (see Displaying Set Up Menu)
f) Select AV2 Connection from middle panel
g) Select Decoder from right panel
h) Press OK [ ] to confi rm
i) Select recording options from left panel
j) Set AV2 Recording to Auto, CVBS, RGB or SVideo
k) If device is VCR:
• Connect VCR to a second Line Input on TV for clear image
CONNECTING TO THE AV IN 3 PORTS
Use audio/video cables to connect input ports (AV IN 3) on Unit to
audio/video output ports on other device.
15
2009-03-04 2009-03-04 3:50:15 3:50:15