Connecting A Digital Camcorder; Digital Audio Connection - LG RHT599H Manual

CONNECTING A DIGITAL CAMCORDER

To connect a digital DV camcorder:
• Use a DV cable to connect the DV IN/OUT port of DV
camcorder to DV IN port on front panel of Unit.
To record from a DV-equipped camcorder to HDD:
a) Press [AV/INPUT] button, under [9] button on remote control,
repeatedly to select DV input
b) Find start position on camcorder recording
c) Press REC on Unit's front panel to start recording
d) Use Unit's remote control buttons for STOP, PLAY and
PAUSE functions
DV recording audio
For digital camcorder with two audio tracks and 32kHz/12-bit sound
connected to DV IN port on front panel of Unit.
To select soundtrack for recording:
a) Display set up menu (see Displaying Set Up Menu)
b) Select recording icon from left panel
c) Select DV Record Audio from middle panel
d) Select option from right panel:
Audio 1: use sound recorded while shooting
Audio 2: use overdubbed sound
e) Press OK [ ]

DIGITAL AUDIO CONNECTION

You can improve your viewing pleasure by connecting a Home
Cinema Dolby Digital / MPEG or DTS decoder via a Digital Audio
Connection (coaxial or optical).
To connect an amplifi er/receiver, Dolby Digital/MPEG/DTS decoder or
other digital equipment:
• Use a digital audio cable (coaxial or optical) to connect Digital
Audio Output port on Unit to corresponding port on amplifi er
For DTS Multi-channel Surround:
• Connect Unit to a DTS compatible receiver via Unit's Digital
LG RHT49X instructions.indd Sec1:16 LG RHT49X instructions.indd Sec1:16
Audio Output.
To choose digital audio signal when using a Digital Audio Output port:
a) Press HOME [ ]. First menu is displayed.
b) Press [ ] until Easy Menu is displayed
c) Select SETUP
d) Press OK [ ] to display set up menu
e) Select audio options icon in left panel
f) Select Audio Signal Type (Dolby, DTS, MPEG) from
middle panel
g) Select option in right panel:
Bitstream when connecting Unit to an audio component with
built-in decoder
PCM when connecting Unit to an audio component without
built-in decoder
Off when connecting Unit to an audio component without
built-in DTS decoder
h) Press OK [ ] to confi rm
Sample Freq. (Frequency)
To choose sampling frequency of audio signal:
a) Display set up menu
b) Select audio options icon in left panel
c) Select Sampling Freq. from middle panel
d) Select option in right panel:
48 kHz for receiver/amplifi er which cannot handle 96 KHz
signal from DVD. Output will be converted to 48 kHz
96 kHz for original audio signal format.
e) Press OK [ ] to confi rm
DRC (Dynamic Range Control)
To improve sound quality when Dolby Digital volume is turned down:
a) Display set up menu
b) Select audio options icon in left panel
c) Select DRC from middle panel
16
2009-03-04 2009-03-04 3:50:16 3:50:16