Terms And Tips; Hdmi Connection - LG RHT599H Manual

CONNECTING YOUR LG RECORDER

TERMS AND TIPS

Unit The LG HDD/DVD Recorder
Press Press a [named] button on Unit's remote control
Select Press [
control to highlight an option
Set Follow instructions for currently displayed menu to
choose an option
Enter Press buttons on remote control to provide a code,
name or password
Panel Part of the display screen. Many screens have left,
middle and right panels
Accessing menus
Press HOME [ ] on remote control to display fi rst menu
Press BACK [
DISPLAYING SET UP MENU
Displaying Set Up Menu
a) Press HOME [ ]. First menu is displayed.
b) Press [ ] until Easy Menu is displayed
c) Select SETUP
d) Press OK [ ] to display set up menu

HDMI CONNECTION

HDMI cables provide optimal connection that produces better picture
& sound quality than a SCART connection and gives you access to
the HD upscaling features of this unit. You can alter the resolution for
the HDMI output by pressing the RES button on the front of the unit
repeatedly (576i, 576p, 720p, 1080i, 1080p).
To connect a High Defi nition television or other HDMI enabled device:
a) Check device is compatible with 720(1440)x576i, 720x576p,
1280x720p, 1920x1080i or 1920x1080p video input.
If TV can't handle 96 kHz sampling frequency:
i Display set up menu (see Displaying Set Up Menu).
ii Select audio options icon in left panel.
LG RHT49X instructions.indd Sec1:14 LG RHT49X instructions.indd Sec1:14
] buttons freely on remote
] from any menu to exit menu displays
iii Select Sampling Freq. from middle panel.
iv Select 48 kHz from right panel.
v Press [OK] to confi rm.
If TV isn't equipped with Dolby Digital and MPEG decoder:
• Set Dolby Digital and MPEG options to PCM.
If TV isn't equipped with DTS decoder:
• Set DTS to OFF.
b) Use an HDMI cable (not supplied) to connect HDMI Output port
on Unit to HDMI Input port on TV.
c) Set resolution using RES. button on front panel of Unit.
d) Check device is switched off.
e) Switch off Unit.
f) Switch on device.
g) Wait 30 seconds.
h) Switch on Unit.
COAXIAL ANTENNA FEED 5V
To supply power to connected antenna:
a) If antenna is indoor:
• Ensure signal amplifi er rate is DC 5V, 100mA
b) Display set up menu (see Displaying Set Up Menu)
c) Auto Programming is highlighted. Select Antenna Feed 5V from
middle panel
d) Select option in right panel:
• If antenna is indoor:
• Select ON
• If antenna is outdoor:
• Select ON or OFF
e) Press OK [ ] to confi rm
14
2009-03-04 2009-03-04 3:50:15 3:50:15