Table of Contents
Advertisement
Restart the ReadyNAS System
If you suspect the files on your ReadyNAS system are corrupted or the quotas are incorrect, you
can check them by restarting your ReadyNAS system from FrontView.
To restart the ReadyNAS system:
1.
From the FrontView main menu, select System > Shutdown.
2.
Select the Shutdown and reboot device radio button.
3.
(Optional) If you suspect the files on your ReadyNAS system are corrupted, select the
Perform volume scan on next boot check box.
The next time you start your ReadyNAS system, the scan is performed. This scan can
take up to an hour to complete, depending on the size of your disk.
4.
(Optional) If you suspect the quotas on your ReadyNAS system are incorrect, select the
Check and fix quotas on next boot check box.
The next time you start your ReadyNAS system, the scan is performed. This scan can
take up to an hour to complete, depending on the size of your disk.
5.
Click the Apply button.
Your ReadyNAS system shuts down and restarts. If you selected any scans, they are
performed when your system reboots, and your system is available for use when the
scans finish.
Turn the ReadyNAS System On and Off Using a Schedule
You can set up a schedule for turning your ReadyNAS system on and off automatically. Each
day of the week can have a different schedule.
To turn the ReadyNAS system on and off on a schedule:
1.
From the FrontView main menu, select System > Power.
2.
In the Power Timer pane, select the Enable power timer check box.
3.
Use the drop-down lists in this pane to establish a schedule for turning your ReadyNAS
system on and off.
Some ReadyNAS systems cannot be turned on automatically. If your system does not
support this feature, Power ON is not available in the Action drop-down list.
If you select the blank entry in the Action drop-down list, the ReadyNAS system is left as
is and is not turned on or off.
4.
Click the Apply button.
Your settings are saved.
ReadyNAS Duo, NV+, and 1100
Manage the ReadyNAS System
97
Advertisement
Table of Contents
