NETGEAR READYNAS NV+ RND4425v1 Software Manual page 67


To set up ReadyNAS Remote on your ReadyNAS system:
1. Make sure you enabled the correct protocols on your ReadyNAS system, as follows:
• If you want to remotely access your share from a Mac or Windows computer, enable
CIFS as described in
• If you want to remotely access your share from an Android phone, iPhone, iPad, or
iPod Touch, enable FTP as described in
2. In the FrontView main menu, select Services > Installed Addons.
3. Select the ReadyNAS Remote check box and click Save.
4. Click the Manage ReadyNAS Remote button.
5. In the ReadyNAS Remote application, enter the email address for the account you created
and click the Find button.
6. In the Found list, select the user name for the account your created and click the Add
button.
The user name is added to the Allowed list.
7. Click the Apply Settings button.

To access a share remotely from a Mac OS X device:
1. Launch ReadyNAS Remote.
2. From the ReadyNAS Remote menu on the right side of the menu bar, select Login and
enter your account name and password.
3. From the ReadyNAS Remote menu on the right side of the menu bar, select Connect to
ReadyNAS.
Finder displays a list of the remote ReadyNAS systems you can access.
4. Double-click the ReadyNAS system you want to access.
5. Do one of the following:
• To log in as a user, click Registered User, enter your user name and password, and
click Connect.
In this step, you are logging in to your ReadyNAS system, not in to ReadyNAS
Remote.
• To log in as a guest, click Guest and click Connect.
6. Select the share to access and click OK.
ReadyNAS Duo, NV+, and 1100
Manage File-Sharing Protocols
Manage File-Sharing Protocols
Store Files
67
on page 43.
on page 43.