NETGEAR READYNAS NV+ RND4425v1 Software Manual page 52

• To give some users read-only access, give other users read/write access, and give all
other users no access, follow these steps:
a. From the Default Access drop-down list, Select Disabled.
b. In the Share Access Restrictions pane, select the Read-only users check box.
c. In the Read-only users field and the Read-only groups field, enter the names of
users and groups to whom you want to grant read-only access.
d. In the Share Access Restrictions pane, select the Write-enabled users check
box.
e. In Write-enabled users field and the Write-enabled groups field, enter the names
of users and groups to whom you want to grant read/write access.
4. Click the Apply button.
If a user name is specified in the Read-only users, Read-only groups, Write-enabled
users, or Write-enabled groups fields, that user has that access to the share. If a user
name is not specified in one of those fields, the user has the access specified in the
Default Access drop-down list.
Select Who Can Access a Share Using NFS with the User Security Mode
If users access your share with NFS, you can specify which computers have access to it, and
what type of access each one has.
To specify a computer, you use its IP address, for example, 10.1.10.104.

To select which computers access a share using NFS:
1. From the FrontView main menu, select Shares > Share Listing.
2. To the right of the share you want to change, click the icon for NFS.
If FrontView does not display an icon for NFS, you need to enable this file-sharing
protocol on your ReadyNAS system. For more information, see
Protocols on page 43.
3. Determine which computers can access the share, as follows:
• To give some computers read/write access and give all other computers read-only
access, follow these steps:
a. From the Default Access drop-down list, select Read-only.
b. In the Share Access Restrictions pane, select the Write-enabled hosts check
box and enter the IP addresses for the computers that you want to have
read/write access.
• To give some computers read-only access and give all other computers read/write
access, follow these steps:
a. Select Read/write from the Default Access drop-down list.
b. In the Share Access Restrictions pane, select the Read-only hosts check box
and enter the IP addresses for the computers that you want to have read-only
access.
ReadyNAS Duo, NV+, and 1100
Store Files
52
Manage File-Sharing