NETGEAR READYNAS NV+ RND4425v1 Software Manual page 55


To select which computers can access a share using FTP:
1. From the FrontView main menu, select Shares > Share Listing.
2. To the right of the share you want to change, click the icon for FTP/S.
If FrontView does not display an icon for FTP, you need to enable this file-sharing
protocol on your ReadyNAS system. For more information, see
Protocols on page 43.
3. To specify that users must be at a specific computer before they have read-only access to
the share, follow these steps:
a. In the Share Access Restrictions pane, select the Read-enabled hosts check box.
b. In the Read-enabled hosts field, enter a comma-separated list of the IP addresses of
the computers.
Users at other computers cannot access the share, even if their user names or
groups are listed in another field.
4. To specify that users must be at a specific computer before they have read/write access to
the share, follow these steps:
a. In the Share Access Restrictions pane, select the Write-enabled hosts check box.
b. In the Write-enabled hosts field, enter a comma-separated list of the network
addresses for the computers
Users at other computers cannot access the share, even if their user names or
groups are listed in another field.
5. Click the Apply button.
If a computer is specified in the Read-only hosts or Write-enabled hosts fields, users at
that computer have that access to the share. If a computer is not specified in one of those
fields, users at that computer cannot access the share.
Select Who Can Access a Share Using HTTP with the User Security Mode
If users access your share with HTTP, you have these choices for security:
• If your ReadyNAS system is on a small local network and you can trust everyone on the
network, you can let anyone on the network access the share.
• If you need more security, you can specify which users can access the share and what
type of access they can have. Every user has the same type of access.
• For the most security, you can specify that a user must be at a specific computer to
access the share. If that computer is in a locked room, users must know the correct user
name and password and they need a key to the room.
To specify a computer, you use its IP address, for example, 10.1.10.104.
ReadyNAS Duo, NV+, and 1100
Store Files
55
Manage File-Sharing