NETGEAR READYNAS NV+ RND4425v1 Software Manual page 45


To enable or disable the FTP file-sharing protocol:
1. From the FrontView main menu, select Services > Standard File Protocols.
2. Select or clear the FTP check box.
3. If you are enabling the FTP file-sharing protocol, manage the following options:
• Authentication mode. If you want to allow only anonymous access to all FTP
shares, from the Authentication mode drop-down list, select Anonymous. Users can
log in only by using 'anonymous" as their user name and their email address as the
password. Users cannot log in with their user names.
If you want users to log in with their user names and passwords, from the
Authentication mode drop-down list, select User.
• Upload resumption. If uploads sometimes fail before they finish, from the Allow
upload resumes drop-down list, select Enabled. If you lose your connection to the
ReadyNAS system during an upload, log in to the FTP share again, start the upload,
and it continues from where it left off.
4. Click the Apply button.
Your changes are saved.

To enable or disable the HTTP file-sharing protocol:
1. From the FrontView main menu, select Services > Standard File Protocols.
2. Select or clear the HTTP check box.
3. (Optional) If you are enabling the HTTP file-sharing protocol, set the following options:
• Redirect default Web access to this share. Select a share from this drop-down list if
you want to automatically redirect http://<ReadyNAS_IP_address> to that share. This
is useful if you do not want to expose your default share listing to outsiders. To
redirect to a share, create an index file (such as index.htm or index.html) in your
target share and enable the HTTP protocol for read-only access to that share.
• Login authentication on this share. Specifies whether or not authentication is
required if users are browsing to the user-created web content on this share.
4. Click the Apply button.
Your changes are saved.

To enable or disable the Rsync file-sharing protocol:
1. From the FrontView main menu, select Services > Standard File Protocols.
2. Select or clear the Rsync check box.
3. Click the Apply button.
Your changes are saved.
ReadyNAS Duo, NV+, and 1100
Store Files
45