Oki 6300FB User Manual page 52

PrOblem
The platen rotates
without paper feed,
or continuous forms
instead of cut sheets
are fed.
Paper distortion.
Unable to eject.
improper continuous forms feed.
No line feed, and no
paper feed.
Paper distortion or jam.
CauSe
Sheets are not loaded to
the end.
The printer is in the
continuous forms mode.
Sheets are not loaded to
the end, or they are not
inserted straight.
Paper with wrinkles, folds
or other defects.
Paper not specified for
the printer.
The FF/LOAD button is
pressed.
Paper is off the Pin
Tractors.
The adjust lever position
does not match the paper
type.
Forms are loaded with
their left holes out of line
with the right ones.
Inadequate distance
between the left and right
Pin Tractors, making for
loose paper.
Skew paper feeding.
Paper movement is
blocked.
Paper source is too far
from the printer.
Paper not specified for
the printer.
Troubleshooting > 52
aCTiOn
Load sheets to the end.
Eject the continuous
forms and select cut
sheet mode for the
printer.
Load sheets to the end.
Change paper.
Use paper types specified
for the printer.
Press the PARK button.
Reload paper correctly.
Set the adjust lever to the
correct position.
Load forms with their left
holes in line with the right
ones.
Relocate the Pin Tractors
to tighten the paper.
Move the paper to make
it straight.
Remove the blockage.
Move the paper source
nearer to the printer.
Use paper types specified
for this printer.