Oki 6300FB User Manual page 37

IteM
TOF (Continuous)
Initial Position
Auto Eject Position
Page Length (Cut
Sheet)
TOF (Cut Sheet)
FunCtIOn
Select the reference position
for the TOF position when
auto loading continuous
form paper from the rear of
the printer. (Up to the mid-
section of characters in the
first line.)
"1Chr. Set Pos." is printed
if the TOF position is set
by using SHIFT + PARK
switches.
This is the position of the
paper when the paper is
already loaded at power on.
(For continuous form mode
only.)
Select a printable area at
the bottom of cut sheets of
paper in cut-paper mode
(the character centre
position).
Select the page length of
cut-paper.
Select the reference
position for the TOF position
when feeding cut-paper in
manual mode. (Up to the
mid-section of characters in
the first line.)
"1Chr. Set Pos." is printed
if the TOF position is set
by using SHIFT + PARK
switches.
Operating instructions > 37
SettIng
2.12 mm (1/12 in)
4.23 mm (1/6 in)
6.35 mm (1/4 in)
8.47 mm (1/3 in)
10.58 mm (5/12 in)
12.7 mm (1/2 in)
14.82 mm (7/12 in)
16.93 mm (2/3 in)
19.05 mm (3/4 in)
21.17 mm (5/6 in)
23.28 mm (11/12 in)
25.4 mm (1 in)
27.52 mm (13/12 in)
1Chr. Set Pos.
Print
Tear OFF
6.35 mm (1/4 in)
14.8 mm
3.5 in, 4 in, 5.5 in, 6 in, 7
in, 8 in, 8.5 in, 11 in, 11
2/3 in, 12 in, 14 in, 17 in,
5 in, 3 in, 3.25 in
2.12 mm (1/12 in)
4.23 mm (1/6 in)
6.35 mm (1/4 in)
8.47 mm (1/3 in)
10.58 mm (5/12 in)
12.7 mm (1/2 in)
14.82 mm (7/12 in)
16.93 mm (2/3 in)
19.05 mm (3/4 in)
21.17 mm (5/6 in)
23.28 mm (11/12 in)
25.4 mm (1 in)
27.52 mm (13/12 in)
1Chr. Set Pos.