Using The Tv Port - Everex StepNote XT5000T User Manual

Everex stepnote xt5000t: user manual
Hide thumbs Also See for StepNote XT5000T:
Table of Contents

Advertisement

N
otebook User Guide
+
Please make sure that the external IEEE 1394 HDD box you purchase on
local electronic store should provide external power adapter. There are
different types of IEEE1394 HDD box and hard disk from different
manufactures, the power consumption has varied range. If the power of the
external IEEE 1394 HDD is supplied from the USB of this notebook, it may
not run properly.
5.4

Using the TV Port

Also found at the right of your computer is one TV port (s-video).
To display your computer screen on the TV, please connect the TV port of
this notebook to the Video Input of the TV set. You can press <Fn> + <F3>
key continually to switch between TFT, external monitor, TFT + external
monitor and TV only. Keep pressing the hot-key until you get the display to
external TV only.
Or you can setup the detail by operate the computer as follows.
1.
Turn off your computer and plug one end of the s-video jack cable to the
end to the input video jack of your television set.
2.
Turn on your computer and your television set.
3.
Click the Start button, then point to Settings, and click Control Panel.
92

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stepnote xt5300tStepnote xt series

Table of Contents