Table of Contents
Advertisement
N
otebook User Guide
•
•
•
•
108
User Password Is
Set/Clear selections show that the notebook is under controlled by User
Password or not.
Set Supervisor Password
Supervisor password gives you the authority in accessing the setup utility.
You also need to enter this password in system booting and resuming
from suspend mode. When you press <Enter> in this field, the Set
Supervisor Password dialog box appears. Enter a new password with up
to 8 alpha-numeric characters, and then re-enter it for confirmation.
Set User Password
This field is only available when Supervisor Password has set. Enter the
user password when boot the system or resume from suspend mode. But
if the Write Protect is set in the Fixed disk boot sector field, you should
enter a supervisor password to access the fixed disk when boot the system
or resume from suspend mode.
Password on Boot
If you set this field to Enabled, your computer will always ask for the
password every time you boot your computer.
Advertisement
Table of Contents
