Table of Contents
Advertisement
ExpressCard modules to be included in smaller host systems. Designed for
both desktop and mobile use, ExpressCard use either USB 2.0 or a single lane
PCI Express technology.
The ExpressCard standard was developed by PCMCIA member companies
including technology leaders, system manufacturers, card manufacturers, from
all other parts of the PC Card industry.
Dimensions of ExpressCard
Current CardBus PC cards are 54 millimeters wide. ExpressCard can divided
into two categories, based on width. Most designs will use the ExpressCard 34
design, which sets the width at 34 millimeters. For some applications, the wider
ExpressCard 54 standard will be used to produce cards that can handle the
higher thermal requirements of those applications.
All ExpressCard modules are 5mm thick but the standard also allows for card
developers to build longer 'extended' modules.
I
NSERTING AND
Your computer includes hot swapping capability, that allows you to exchange
cards while the computer is turn on and start using it immediately.
Inserting ExpressCard
To insert a ExpressCard into the ExpressCard slot:
1.
Locate the ExpressCard slot cover on the right side of the computer.
2.
Insert the side of ExpressCard with the 26-pin socket into the
ExpressCard slot. The face label of the card should also be facing up.
3.
When the full length of the card is almost inside the slot, push firmly but
slowly, to ensure full connection with the computer. The ExpressCard will
R
EMOVING A
Using Your Notebook
E
C
XPRESS
ARD
3
61
Advertisement
Table of Contents
