Table of Contents
Advertisement
N
otebook User Guide
3.
Remove the screws and open the DIMM cover by your finger.
4.
Locate the memory module into the empty memory module sockets.
(Your system comes with one memory module already installed in the
socket.)
+
Avoid touching the exposed components inside the system. Doing so may
damage the system.
5.
Insert the connector of the memory module into the socket. Make sure
the notch of the memory module fits the nose of the socket.
6.
Put the DIMM door back and secure the screw on the DIMM door.
7.
Turn the system over.
116
Hold the memory module at a 30-degree angle and push its
connector into the memory socket of the notebook.
Press down on the edge of the memory module until the locking
tabs on both sides is locked.
Advertisement
Table of Contents
