Philips RQ1297CC User Manual page 31

Problem
The shaver is not
entirely clean after
I clean it in the Jet
Clean System.
Possible cause
The shaving unit is soiled
or damaged to such an
extent that the motor
cannot run. In this case,
the shaving unit symbol,
the tap symbol and the
exclamation mark flash.
The temperature of the
shaver is too high. In this
case, the shaver does not
work and the exclamation
mark on the display flashes.
The cleaning fluid in the
cleaning chamber is soiled.
The cleaning fluid level is
too low. If the fluid volume
in the cleaning chamber
drops below the minimum
level during the cleaning
program, the program
aborts.The cleaning light
and the 'cleaning chamber
empty' symbol flash at
intervals and the holder
returns to its starting
position.
ENGLISH
Solution
Clean the shaving
unit or replace
it (see chapters
'Cleaning and
maintenance' and
'Replacement').
Switch off the shaver
and let it cool down.
As soon as the
temperature of the
shaver has dropped
sufficiently, you can
switch on the shaver
again.
Empty and rinse the
cleaning chamber
and refill it with new
cleaning fluid.
Refill the cleaning
chamber with
cleaning fluid to
a level between
the two lines (see
chapter 'Cleaning
and maintenance').
31