Philips RQ1297CC User Manual page 13

Charging in the Jet Clean System
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Hold the shaver upside down above the holder
with the back of the shaver pointing towards
the holder.
Note: The shaver cannot be placed in the Jet Clean
System when the protection cap is on the shaving unit.
Note: When you turn the shaver upside down, the minutes
indication on the display is also turned upside down so you
can still see to what level the battery is charged.
4 Place the shaver body in the holder behind the
two clips (1) and press it down until it locks
into place (2).
, The display shows that the shaver is charging
(see section 'Charging' in chapter 'The display').
Using the shaver
Shaving
Skin adaptation period
Your first shaves may not bring you the result you
expect and your skin may even become slightly
irritated. This is normal. Your skin and beard need
time to adapt to any new shaving system.
We advise you to shave regularly (at least 3 times
a week) for a period of 3 weeks to allow your skin
to adapt to the new shaver. During this period, use
your new electric shaver exclusively and do not use
other shaving methods. If you use different shaving
methods, it is more difficult for your skin to adapt to
the new shaving system.
ENGLISH
13