Setting an indoor unit address and installation option (Continued)
SEG 3, 4, 5, 6, 8, 9 additional information
When the SEG 3 is set as "1" and follow Auto Change Over for HR only operation, it will operate as follows.
Temp.
Ts
for Auto mode
Cooling/Heating mode can be changed when Thermo Off status is maintained during the time with SEG9.
34
Standard temp. for
→
Heating
Cooling
b
Standard temp.
for Cooling
Set temp.
d
Standard temp.
→
for Cooling
Heating
c
B
C
D
A
a
Standard temp.
for Heating
A : Set with SEG4(˚C)
B : Set with SEG5(˚C)
C : Set with SEG6(˚C)
D : Set with SEG8(˚C)