Wi-Fi Direct - Samsung HT-J5500W User Manual

Wi-Fi Direct

The Wi-Fi Direct function allows you to connect Wi-
Fi Direct devices to the product and each other using
a peer-to-peer network, without a wireless router.
Some Wi-Fi Direct devices may not support
✎
the DLNA function if connected via Wi-Fi
Direct. If this is the case, change the network
connection method you used to connect the
device to the home theater.
Wi-Fi Direct transmissions can interfere
✎
with Bluetooth signals. Before you use the
Bluetooth function, we strongly recommend
that you turn off the Wi-Fi Direct function on
any device in which it is currently on.
Turn on the Wi-Fi Direct device and activate its
1.
Wi-Fi Direct function.
In the Home screen, select Settings, and then
2.
press the v button.
Select Network, and then press the v button.
3.
Select Wi-Fi Direct, and then press the v
4.
button.
The Wi-Fi Direct devices that you can connect
to appear.
Settings
Wi-Fi Direct
Picture
Device Name : [HTS]J5500W
Sound
Select your Wi-Fi Direct device to connect to.
Network
System
AndroidXXXXXXX Not Connected
Language
Security
General
Support
You have three ways to complete the Wi-Fi
5.
connection:
Through the Wi-Fi device.
●
Through the product using PBC.
●
Through the product using a PIN.
●
Each is covered below.
Through the Wi-Fi Device
On the Wi-Fi device, follow the device's
1.
procedure for connecting to another Wi-Fi
Direct device. See the device's user manual for
instructions.
When you have completed the procedure, you
2.
should see a pop-up on your TV screen saying
that a device that supports Wi-Fi Direct has
requested to connect. Confirm that the device
that is making the request is your device, select
Yes in the pop up, and then press the v
button to accept.
The Connecting pop-up appears, followed by
3.
the Connected pop-up. You should see the
device listed as connected on the Wi-Fi Direct
screen, and then press the v button.
The PBC and PIN procedures connect devices
●
automatically.
Through the Product Using PBC
Select the Wi-Fi Direct device you want to
1.
connect to this product, and then press the v
button.
The Connecting pop-up appears, followed by
2.
the Connected pop-up. When it closes, you
should see the device listed as connected on
the Wi-Fi Direct screen.
Through the Product Using a PIN
Select the Wi-Fi Direct device you want to
1.
connect to this product, and then press the v
button.
The PIN pop-up appears.
2.
Note the PIN code in the pop-up, and then
3.
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
Refresh
The Connecting pop-up appears, followed by
4.
Close
the Connected pop-up. When it closes, you
should see the device listed as connected on
the Wi-Fi Direct screen.
The current wired or wireless network
✎
connection will be disconnected when you use
the Wi-Fi Direct function.
Text files, such as files with a .TXT or .DOC
✎
extension, will not display when you are using
the Wi-Fi Direct function.
23
- English