Connecting To A Network Router - Samsung HT-J5500W User Manual

Connecting to a Network Router

You can connect your product to your network
router using one of the methods illustrated below.
Wired Network
Broadband modem
(with integrated router)
Or
Router
Your router or your Internet Service Provider's
✎
policies may prevent the product from
accessing Samsung's software update server.
If this occurs, contact your Internet Service
Provider (ISP) for more information.
DSL users, please use a router to make a
✎
network connection.
Use Cat 7 (*STP Type) cable for the connection.
✎
(* Shielded Twist Pair)
You cannot use the product if the network
✎
speed is slower than 10Mbps.
To use the DLNA function, you must connect
✎
your PC to your network as shown in the
illustrations above.
The connection can be wired or wireless.
Broadband
service
Broadband
service
Broadband
modem
13
- English
Wireless Network
If your wireless IP router supports DHCP, this
✎
product can use a DHCP or static IP address to
connect to the wireless network.
Set your wireless IP router to Infrastructure
✎
mode. Ad-hoc mode is not supported.
The product supports only the following
✎
wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
Select a channel on the wireless IP router that
✎
is not currently being used. If the channel set
for the wireless IP router is currently being
used by another device nearby, it will result in
interference and communication failure.
In compliance with the newest Wi-Fi
✎
certification specifications, Samsung home
theaters do not support WEP, TKIP, or TKIP-
AES (WPS2 Mixed) security encryption in
networks running in the 802.11n mode.
Wireless LAN, by its nature, may cause
✎
interference, depending on the operating
conditions (AP performance, distance,
obstacles, interference by other radio devices,
etc.).
Wireless IP sharer
Broadband
service