Connecting To A Tv And External Devices - Samsung HT-J5500W User Manual

Connections

Connecting to a TV and External Devices

Red
R
White
W
External Devices
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with
only this cable connected. See page 17 in this manual and the section on ARC in your TV's user's manual
for details.
Connecting to External Devices
Two methods of connecting external devices to your home theater are explained below.
Method 1 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on
the external analog component.  Select the AUX mode.
Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
●
Method 2 OPTICAL : Connecting an External Digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes) to the home theater. Using a digital optical cable (not supplied), connect the Optical
Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital
optical cable.  Select the D. IN mode.
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
✎
This system supports Digital sampling frequencies of 32 kHz or higher from external digital
✎
components.
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not
✎
supported.
Selecting an External Device to Use
To select an external device after you have connected it, press the
button, the mode changes in this order : BD/DVD ; D. IN ; AUX ; FM ; BT
Method 1 Method 2
AUDIO OUT
12
- English
OPTICAL OUT HDMI IN (ARC)
button. Each time you press the
FUNCTION