Table of Contents
Advertisement
A+ SERVER 2022TG-HLIBQRF/HLTRF USER'S MANUAL
6-10 Expansion Card Setup
The SC827 chassis supports one low-profile expansion slot for each node, for a
total of four slots in the chassis. The maximum length for expansion cards is up to
5.9" (149.86 mm).
Installing Expansion Cards
1. Disconnect the power supply, pull the node drawer from the chassis and lay
the drawer on a flat surface.
2. Pull open the expansion card slot clip in the rear of the drawer.
3. Slide the temporary PCI slot shield toward the slot clip and remove the
temporary shield from the chassis (see Figure 6-13).
PCI Slot Shield
Figure 6-13. PCI Slot Shield Placement
6-14
Add-on Card Slot Clip
Advertisement
Table of Contents
