Table of Contents
Advertisement
Appendix B: System Specifications
Appendix B
System Specifications
Note: Unless noted specifications apply to a complete system (all serverboards).
Processors
Two AMD Opteron 6000 series processors in AMD Socket G34 type sockets per
node
Note: Both CPUs must be of the same type.
Note: Please refer to our web site for a complete listing of supported processors.
Note: Supports 6000 processors with Max ACP 80W (TDP 115W)
Chipset
One AMD SR5690 chipset and one SP5100 Southbridge chipset per node
BIOS
16 Mb AMI BIOS® SPI Flash ROM per node
Memory Capacity
Up to 8 single/dual/tri/quad channel DIMM slots that
support up to 64 GB of ECC/Non-ECC UDIMM or up to
256 GB of ECC RDIMM DDR3-1866/1600/1333/1066 Mhz,
1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB size SDRAM of 1.5V or 1.35V
voltages.
SATA Controller
On-chip (SP5100) SATA controller supporting three (3) SATA HDD per each
serverboard (RAID 0, 1 supported)
Drive Bays
The A+ Server 2022TG-HLTRF /HLIBQRF server has a total of twelve (12) hot-
swap drive bays to house twelve (12) standard SATA bays (3 for each node)
Expansion Slots
Total of four PCI-Express x16 low-profile slots on serverboards (one for each
serverboard with preinstalled riser card )
B-1
Advertisement
Table of Contents
