Setting The Stock Sensor - Citizen CMP-40L User Manual

4.2 Setting the Stock Sensor

This menu sets sensor level value for each sensor (Gap, Black Mark).
(1) Display the SETUP menu.
For details, refer to Menu operation examples on page 42.
(2) Press the Up ( ) or Paper Feed/Down ( ) button to select the
items in the following order.
Sensors – Sensor Calibrate
(3) Conduct testing by referring to the following picture.
4.2.1 Testing the Label Gap mode
(1) Turn the printer off, and then remove one or two labels from the liner.
With the printer in peel mode, place the liner over the sensor.
alle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 30
PEELER SENSOR
V10 CONSUMIBLES S.L.
B/M & GAP SENSOR
56