HDD Carrier Removal
Prerequisite:
HDD Module Removal
1. Remove four (4) screws (A) from the brackets (Figure 3-13).
A
D
A
Figure 3-13. HDD Module Brackets
2. Remove brackets (B, C) and mylar (D) from HDD.
3. Remove mylar from brackets.
HDD Carrier Installation
1. Install mylar (D) to brackets (C, D). (Figure 3-13)
2. Install and secure brackets and mylar to HDD module with four (4) screws (A).
3. Install HDD module.
A
Machine Maintenance Procedures
C
ID
Size
M3.0x3.0Ni
B
Quantity
Screw Type
4
0
A
A
0
3-17