Table of Contents
Advertisement
Machine Maintenance Procedures
Introduction
This chapter contains general information about the notebook, a list of tools needed to
perform the required maintenance and step by step procedures on how to remove and install
components from the notebook computer.
General Information
The product previews seen in the following procedures may not represent the final product
During the removal and installation of components, make sure all available cable channels
and clips are used and that the cables are installed in the same position.
All prerequisites must be performed prior to performing maintenance.
Recommended Equipment
The following tools are required to perform maintenance on the notebook:
Wrist grounding strap and conductive mat
Flat screwdriver
Philips screwdriver
Table 3-1. Main Screw List
M2.5x4.0
M2.45x8.0
M2.0x3.0+2.0
M2.0x5.0
M3.0x3.0
M2.0x3.0
M2.5x3.2
M2.0x2.5
M2.0x1.6
M2x1.6
M2.0x3.0
Machine Maintenance Procedures
Screw Name
Quantity
21
13
1
8
4
4
4
8
5
2
17
0
0
0
3-5
Advertisement
Chapters
Table of Contents
