Main and Secondary HDD Module Carrier Removal
Prerequisite:
NOTE:
NOTE:
The following procedure is used for both the main and secondary HDD module carriers.
1. Remove screws (A) from carrier. (Figure 3-17)
B
Figure 3-17. HDD Module Carrier Screws
2. Remove left and right brackets (B) from module.
3. Remove mylar covering (C) from module. (Figure 3-18)
Figure 3-18. HDD Carrier Mylar Covering
3-18
Main and Secondary HDD Module Removal
A
C
Machine Maintenance Procedures
0