Table of Contents
Advertisement
VIDEO Mode (For NTSC, lower resolution)
Layer 1
Layer 2
Brightness
Display
Gamma
Image
Freeze
Exit
Lamp
Advance
Language
Setting
Factory
Reset
Exit
Camera as Switch
The DVI Adapter connects the DVI output to an input for a computer (VGA).
When this input is used, the "SOURCE" button or menu command will switch
the output between the "CAMERA IMAGE" and the "COMPUTER" image
(VGA) on the DVI adapter.
When camera is "OFF" the computer VGA signal from the "DVI Port" adapter
will pass through the camera to the "VGA Out" port. Thus the camera can be in
a path to a projector and will let the signal pass through. If the camera is turned
on the VGA pass through remains until the "Source" button is pressed. The
camera image then becomes the output.
Note: The camera must be plugged in to have this pass through feature.
Layer 3
0-46 (for PAL)
0-40 ( for NTSC)
Photo/Text
Normal/Gray
On/Off
On/Off
Full Range On/off
Night view On /off
Exit
English /¤ ¤ Á c
/¤ ¤ Â ²
Enter / Exit
Function
Brightness adjustment
Select Photo/Text Mode.
Select Normal/Gray Mode.
Use Freeze to retain the image on
the screen.
Exit this menu.
Turn On/Off lamp
Switch Full range on/off and night
view on/off
Select a preferred language on the
/Exit
menu.
Reset all the values to the factory
default.
Exit this menu.
Exit menu.
15
Advertisement
Table of Contents
