Change Batteries; Factory Restart; Sensor Weather Shield - La Crosse Technology 308-1417V2 Instruction Manual

We designed this station for convenience, so that a simple change of batteries does not lose your data or
require you to power down your station.
Sensor:
1. When Battery Indicator shows next to the Outdoor Temperature, replace batteries in your Outdoor
Sensor.
2. Then hold the SENSOR button for 3 seconds and your station will search for your sensor.
Station:
1. When Battery Indicator shows next to the Indoor Humidity, change batteries in the station.
2. After replacing the batteries in the station, it will automatically search for the sensor. Press the TX button
on the sensor to force a signal transmission. When outdoor temperature readings are received, set time
and date.
A factory restart of the station returns it to default settings, and "out of the box" condition and may resolve
connection issues.
1. Be sure there are fresh batteries in the sensor and station.
2. Hold the ALERTS and PRESSURE button together for 5 seconds to restart the station. This will clear all
settings and history. Station will automatically search for sensor.
S ENSOR W E AT HE R S H IE L D- NOT I NC LU DED
The Sensor Weather Shield is designed to protect your outdoor sensor from rain and snow. This shield will
offer limited protection from the sun's heat. Purchase at:
W IRE LE S S WE AT HER STAT I O N WI TH F O R ECAST & ATOMI C TI ME
C HA N GE B ATTER I ES
FAC TORY RESTA RT
http://bit.ly/925-1418
9 | PAGE