Related Manuals for La Crosse Technology 308-1416v2
Summary of Contents for La Crosse Technology 308-1416v2
- Page 1 Atomic Forecast Station with Moon Phase For online video support: http://bit.ly/LaxTechTalk Model: 308-1416v2 Instruction Manual DC: 100120...
-
Page 2: Table Of Contents
Welcome to the La Crosse Technology® family! Let’s Get Started We hope you enjoy your new Atomic Forecast Station with Moon Phase. 1. Insert 2 AA batteries into your sensor. Observe correct polarity. Table of Contents ∙ The red LED light will flash when Let’s Get Started... -
Page 3: Lcd Features
LCD Features Basic Settings 1. Hold the SET button for 3 seconds to enter basic settings. 2. Press and release the + or - button to adjust flashing values. Hold to adjust quickly. 3. Press and release the SET button to move to the next menu item or exit the basic settings menu. -
Page 4: Atomic Time Signal -Wwvb
Fahrenheit \ Celsius InHg or hPa Pressure Number Language Beep ON | OFF Atomic ON | OFF DST ON | OFF Time Zone 7 Time Zones Atomic Time Signal -WWVB • Your station will search for the atomic signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00. -
Page 5: Moon Phases
Moon Phases Pressure Readings Your station provides Relative Barometric Pressure in: The moon phase is based on the Lunar Calendar and updates • Numbers-programmable in the settings menu when the year, month and date set (manually or by the WWVB •... -
Page 6: Weather Forecast Icons
Weather Forecast Icons Forecast Trend Arrows • The forecast icons are determined by your station's The arrows by the word FORECAST, indicate the change in barometric pressure reading. Please allow 7-10 days for pressure over the past 3 hours. calibration. •... -
Page 7: Temperature/Humidity Trend Arrows
Temperature/Humidity Trend Arrows • Hold the ALERTS button to enter alert menu. • Outdoor LO ALERT ON | OFF will flash. • The UP and DOWN arrows indicate changes in temperature and humidity over the past hour. Alert ON: • They update every 15 minutes and compare data from 1. -
Page 8: Active Alert
Active Alert Low Battery Icon • By indoor temperature; replace batteries in station. • The alert icon will only show when the alert is active, and will indicate HI or LO alert. • By outdoor temperature; replace batteries in the sensor. •... -
Page 9: Station Restart
We truly want to make owning a La Crosse Technology product not only a practical • Mount the TX141TH-Bv3 sensor on a north-facing experience, but also a fun one. -
Page 10: Care And Maintenance
(Required) AC6: GPU280500150WAOO Warranty and Support 3-AA batteries not included, backup for time Optional Battery Backup: La Crosse Technology, Ltd. provides a 1-year limited time and date warranty (from date of purchase) on this product relating to 2-AA batteries not included TX141TH-Bv3 Sensor: manufacturing defects in materials &... -
Page 11: Fcc Statement
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.