Sensor Search; Change Batteries; Sensor Weather Shield - La Crosse Technology S88907V2 Instruction Manual

• If you are seeing dashes in place of outdoor temperature, first check your sensor batteries.
• Hold the HEAT/DEW button for 3 seconds to search for the sensor. Sensor Reception icon will flash while
searching and be solid when sensor signal is received.
• If you regain connection while the sensor is mounted, great. If you do not regain connection, bring the
sensor within 10 feet of the station and search again.
Note:
• If the signal is lost, the station will display the last data recorded from sensor for 10 minutes.
• After that 10 minutes if the signal does not come back then you will see dashes "--".
• After 30 minutes, start looking for the sensor signal automatically.
We designed this station for convenience, so that a simple change of batteries does not lose your data or
require you to power down your station.
Sensor:
1. When Battery Indicator shows next to the Outdoor Temperature, replace batteries in your Outdoor
Sensor.
2. Then hold the HEAT/DEW button for 3 seconds and your station will search for your sensor.
Station:
1. When Battery Indicator shows next to the Indoor Temperature, change batteries in the station.
2. When changing the batteries in the station, continue using the power cord. After replacing the batteries,
no other action is needed. The batteries in the station only maintain time/date in the event of a power
outage.
S EN SO R WE AT HE R S H I EL D- N OT I N CLU DE D
The Sensor Weather Shield is designed to protect your outdoor sensor from rain and snow. This shield will
offer limited protection from the sun's heat. Purchase at:
W IRE LE S S COLOR WEAT HE R STAT I O N
S E N S OR S EA RC H
CHA N G E BATTE RI ES
http://bit.ly/925-1418
Sold separately
8 | PAGE