Package Contents; Intended Use; Electrical Safety - DeWalt DC351 Instruction Manual

• The battery packs have effective protection
against internal overpressure and short-
circuiting.
• Appropriate measures have been provided for
prevention of forced rupture and dangerous
reverse current.
• The equivalent lithium content is below the
relevant limit value.
D WALT Li-Ion battery packs are exempted from
E
national and international regulations applicable
to dangerous goods. However, these regulations
become relevant when transporting several battery
packs together.
• Make sure that battery packs are packed
according to the dangerous goods regulations
as mentioned above to prevent short-circuiting.

Package contents

The package contains:
1 Plunge saw
1 Rail clamp
1 Allen key
2 Battery packs (DC351KL)
1 Charger (DC351KL)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1–4)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.

INTENDED USE

The DC351 heavy-duty plunge saw is designed for
professional sawing applications and cutting wood
products.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
This plunge saw is a professional power tool.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
a. plunge trigger
b. on/off switch
c. main handle
d. shoe
e. bevel adjustment knob
f. depth adjustment knobs
g. depth scale
h. front handle
i. dust extraction outlet
j. rail adjuster
k. blade
l. lock button
m. lock lever
n. battery pack
o. charger
p. charging indicators
q. battery release button
r. blade clamping screw
s. outer flange
t. inner flange
u. riving knife
v. riving knife screw
w. cutting indicator
x. anti-kickback knob
y. outer guard
z. guide rail
aa. clamp
bb. blade position indicators

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D WALT charger is double insulated
E
in accordance with EN 60335; therefore
no earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organization.
E
Mains plug replacement
(U.K. & Ireland only)
DANGER:
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
EN GL IS H
35