Table of Contents
Advertisement
English
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D
WALT battery packs only with designated
e
D
WALT chargers. Charging battery packs other than
e
the designated D
WALT batteries with a D
e
charger may make them burst or lead to other
dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCS373 operates on an 18V XR Li-Ion battery pack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185,
DCB187, DCB189, DCB546, DCB547, DCB548. Refer to Technical
Data for more information.
Package Contents
The package contains:
1 Cordless metal-cutting circular saw
1 30 tooth blade
1 Hex key
1 Kitbox
12
1 Charger
1 Li-Ion battery pack (C1, D1, G1, L1, M1, P1, S1, T1, X1, Y1
models)
2 Li-Ion battery packs (C2, D2, G2, L2, M2, P2, S2, T2, X2, Y2
models)
3 Li-Ion battery packs (C3, D3, G3, L3, M3, P3, S3, T3, X3, Y3
models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D
trade names are those of their respective owners.
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Visible radiation. Do not stare into light.
WALT
e
Date Code Position (Fig. C)
The date code
21
is printed on the battery port.
Description (Fig. A, D–F)
WARNING: Never modify the power tool or any part of
it. Damage or personal injury could result.
Trigger switch
1
Trigger switch lock-off button
2
3
Depth adjustment lever
Spindle lock button
4
Kerf indicator
5
6
Blade clamping screw
Lower guard
7
Lower guard retracting lever
8
9
Battery pack
Sight window
10
Shoe
11
WALT is under license. Other trademarks and
e
, which also includes the year of manufacture,
2021 XX XX
Year of Manufacture
Advertisement
Table of Contents
