Temperature Adjustment During Auto; Fan Speed; Airfl Ow Direction Adjustment - Mitsubishi Heavy Industries SRR25ZM-S User Manual

Temperature adjustment during AUTO

■ Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the
the button.During automatic operation, 24°C is preset both for heating and cooling.

FAN SPEED

■ You can choose the fan speed of your air-conditioner without dry mode.
Airfl ow direction adjustment
■ Air fl ow direction adjustment can not be performed, although a display will be
changed if "AIR FLOW" button is pushed.
1
Press the" or
When it is a little cold
Press the button.
■ Each time the button is pressed, the switch over occurs in the following order
–6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicated, even if the
When it is a little hot
Press the button.
■ Each time the
button is pressed, the switch over occurs in the following order
+6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicated, even if the
Setting
-6 -5
temp.(°C)
18 19
1
Press the FAN SPEED button.
Each time the button is pressed, the fan speed changes.
AUTO
Operation capacity by your choice
Set automatically by microcomputer
Silent operation
Energy-saving operation
Standard operation
Powerful operation with high capacity
NOTE
• When FAN SPEED is changed from Hi to Lo or ULo, the sound of
refrigerant fl owing may be heard.
Adjusting up/down air fl ow direction
– 12 –
(TEMP)" button.
button is pressed, the indicator does not change.
button is pressed, the indicator does not change.
Remote Control display
+ 0
-4 -3 -2 -1 +1
20 21 22 23 24 25
ULo Lo
button or
+2 +3 +4 +5 +6
26 27 28 29 30
Me Hi
FAN SPEED
AUTO
ULo
Lo
Me
Hi