Disabling The Link Function - Brother PR670E Operation Manual

i To change the embroidering settings for the
opened embroidery pattern, touch
• Touch when the following message appears.
Touch to return to the embroidering screen.
 The embroidering settings screen appears.
j After the desired settings have been
specified, touch
embroidering screen.
k Touch , and then press the start/stop
button to start embroidering.
 When embroidering is finished, the following
message appears.
.
to return to the
SELECTING/EDITING/SAVING PATTERNS
l To open another pattern sent from the
computer, touch
procedure starting from step
embroidering.
To stop embroidering or to embroider the same pattern
again, touch .
Note
• The embroidering screen settings specified
j
in step are saved even if
touched to continue sewing after
embroidering is finished.
Memo
• If the embroidery machine is turned off
while it is embroidering, the resume
operation can be used the next time it is
turned on.

Disabling the Link function

a Touch , and then touch
display page 5 of the settings screen.
b Touch to disable the Link function.
 When the following message appears, touch
c Turn off the machine.
, and then repeat the
h
to continue
was
and to
.
145
5