Sewing Large-Size (Split) Embroidery Patterns - Brother PR670E Operation Manual

Sewing Large-size (Split)
Embroidery Patterns
Large-size (split) embroidery patterns created with
PE-DESIGN Ver.7 or later can be sewn. With
large-size embroidery patterns, embroidery
designs larger than the embroidery hoop are
divided into multiple sections, which combine to
create a single pattern after each section is sewn.
For details on creating large-size embroidery
patterns and for more detailed sewing instructions,
refer to the operation manual included with PE-
DESIGN Ver.7 or later.
The following procedure describes how to read
the large-size embroidery pattern shown below
from USB media and embroider it.
a Connect to the machine the media
containing the created large-size
embroidery pattern, and then select the
large-size embroidery pattern to be
embroidered.
* For details on recalling patterns, refer to "Recalling
from USB media/SD card" on page 138 and
"Recalling from the computer" on page 139.
 A screen appears so that a section of the large-size
embroidery pattern can be selected.
b Select section
touch .
• Select the sections in alphabetical order.
• A maximum of 10 sections can be displayed in one
page with normal thumbnail size. If there are 11 or
more sections in the pattern, touch
display the previous or next page. With large
thumbnail size, a maximum of 4 sections can be
displayed in one page. With small thumbnail size, a
maximum of 21 sections can be displayed in one
page.
c If necessary, edit the pattern. Then, touch
.
• For details, refer to "Editing the Embroidery Pattern
(Pattern Editing Screen)" on page 146.
d Confirm the pattern size, and then select
the appropriate fabric and the embroidery
frame.
• Be sure to select fabric of the size of combined
pattern.
APPENDIX
to be embroidered, then
or to
195
7