Real-Time Recording To Track 1 - Casio CTK-573 User Manual

MODE
INTRO
NORMAL/FILL-IN
VARIATION/FILL-IN

Real-time Recording to Track 1

With real-time recording, the notes and chords you play on the key-
board are recorded as you play them.
To record to Track 1 using real-time recording
1.
Use the MEMORY button to enter record standby.
ETUDE
CONCERT
PIECE
2.
Use [+] and [–] to select 0 or 1 as the song number.
• The track is not yet selected at this point.
• The above song number screen remains on the display for
about five seconds. If it disappears before you have a chance
to select a song number, use the MEMORY button to display
it again.
Song number
3.
Press the LEFT/TRACK 1 button to select Track 1.
• The "L" flashes on the display to indicate the track that will
be recorded to.
Flash
4.
Make any of the following settings if you want.
• Tone number (page E-14)
• Rhythm number (page E-16)
• MODE switch (page E-17)
• If you are not confident about playing at a fast tempo, try
using a slower tempo setting (page E-16).
E-28
LEFT/TRACK 1
START/STOP
SYNCHRO/ENDING
5.
6.
7.
LAYER
SPLIT
• If you make a mistake while recording, stop the record operation
GM
and begin over again from step 1.
TOUCH
RESPONSE
NOTE
MEMORY
Using real-time recording to record to a track that already contains record-
ed data replaces the existing recording with the new one.
Flash
Track 1 Contents After Real-time Recording
In addition to keyboard notes and accompaniment chords, the fol-
lowing data is also recorded to Track 1 during real-time recording.
This data is used whenever Track 1 is played back.
• Tone number
• Rhythm number
• INTRO, SYNCHRO/ENDING, NORMAL/FILL-IN, VARIATION/
FILL-IN button operations
• Pedal operations
Memory Capacity
The keyboard has memory for approximately 5,200 notes. You can
use all 5,200 notes for a single song, or you can divide memory be-
tween two different songs.
• The measure number and note number flash on the display when-
ever remaining memory is less than 100 notes.
• Recording automatically stops (and Auto Accompaniment and
rhythm stops playing if they are being used) whenever memory
becomes full.
RIGHT/TRACK 2
[+]/[–]
Press the START/STOP button to start real-time re-
cording to Track 1.
Play something on the keyboard.
• Any melody and accompaniment you play on the keyboard
(including Auto Accompaniment chords played on the ac-
companiment keyboard) is recorded.
• If you use a pedal during recording, pedal operations are
also recorded.
Press the START/STOP button to end recording when
you are finished playing.
MEMORY
Flash
702A-E-030A